Amfitwin version 7.1.3 Updater : ( 32bit | 64bit​ )

  • ​Important note: if you use an Amfit Mill, run the 7.1.3 Update in conjunction with updates to your ​scanning equipment.
  • Contact Digitizer model 2060, 2070 & 2080 supported
  • Importing files from version 3x is not supported on 64bit platform

Amfitware Configure Tool - Send to Fab : Download Updater​

  • ​Updates configuration to switch the transfer panel to Send to Fabrication Center

Amfitware Configure Tool - Corporate : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Mill & edit station
  • Ability to send files to central database
  • Installer Digitally signed

mandoos

molinari

Version 7.3.2 : Download Installer ( 32bit | 64bit ) | Download Updater 

  • ​Important note: if you use an Amfit Mill, run the 7.3 Update in conjunction with updates to your ​scanning equipment.
  • Mill panel update (blank selection guide)
  • Importing files from version 3x is not supported on 64bit platform
  • Contact Digitizer model 2060, 2070, 2080 & 2090
  • Contact Digitizer LPT model 2040 & 2050 (32bit only)
  • Ability to search by Phone Number added
  • French language
  • Ability to scan children sizes
  • Installation of key cuts changed to 1 entry widget
  • Mill diagnostics panel improvement
  • Improved 2D / 3D editing
  • Orthotic Design panel available (Polypro enabled)

Amfit Configure Shape Library : Download​ 

  • Updates parameters for Pad tool​

CAMUS

Amfitware Configure Tool - Corporate : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Mill & edit station
  • Ability to send files to central database
  • Installer Digitally signed

Amfit Upgrade version 5.9.6.4 TLM (Mill) : Download Updater​ 

  • ​Ability to scan children sizes
  • Added dongle failure support
  • Network is enabled
  • Mill updater

Amfit Configure IP - Mandoos - Satellite : Download Updater​

  • ​Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Digitizers and satellite station

Amfitware Amfit Database Reports 4.1 - Camus : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed

Rainville FOOT HEALTH

Configure IP : Download Updater​

  • ​Configuration is intended for Beta testing

HAGEN O&P

Amfitware Configure Tool - Satellite : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Digitizers and satellite station
  • Ability to send files to central database
  • Installer Digitally signed

Amfitware Configure Tool - Satellite : Download Updater​ 

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Digitizers and satellite station
  • Ability to send files to central database
  • Installer Digitally signed

Amfitware Amfit Database Reports 4.1 - Althea : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed

Version 5.9.6.3.s : Download Installer​

Amfitware Configure Tool - Corporate : Download Updater​ 

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Mill & edit station
  • Ability to send files to central database
  • Installer Digitally signed

Amfitware Configure Tool - Satellite - Send to Fab : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Digitizers and satellite station
  • Updates configuration to switch the transfer panel to Send to Fabrication Center
  • Ability to send files to central database
  • Installer Digitally signed

ORTHOFACT

Configure Main Site : Download Updater​

  • ​Configuration is intended for Main Central Site
  • Network enabled
  • Ability to retrieve records from Amfit's server
  • Ability to sweep records from FTP to the Amfit server
  • Updates Sweep ID Prefix to GR

Amfitware Amfit Database Reports 4.1 - Hagen : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed

Version 4.2.n10 : Download Installer​​

Version 7.5 : Download Installer ( 32bit | 64bit ) | Download Updater 

  • ​Important note: if you use an Amfit Mill, run the 7.5 Update in conjunction with updates to your ​scanning equipment.
  • Mill panel update (blank selection guide)
  • Importing files from version 3x is not supported on 64bit platform
  • Contact Digitizer model 2060, 2070, 2080 & 2090
  • Contact Digitizer LPT model 2040 & 2050 (32bit only)
  • Ability to search by Phone Number added
  • Italian language
  • Ability to scan children sizes
  • Installation of key cuts changed to 1 entry widget
  • Mill diagnostics panel improvement
  • Improved 2D / 3D editing
  • Orthotic Design panel available (Polypro enabled)

Amfitware Configure Tool - Send to Fab : Download Updater​

  • ​Updates configuration to switch the transfer panel to Send to Fabrication Center

AmfitCAM™ Version 12.8.4 Light : Download Installer​​

  • Import Amfit scan data to CNC Milling Machines
  • Produces G-Code File output
  • Produces Paromed File output
  • Local Database
  • Provides key elements needed for production management
    • Process control
    • Product labeling

Version 7.3.2 : Download Installer ( 32bit | 64bit ) | Download Updater

  • ​​​Important note: if you use an Amfit Mill, run the 7.3.2 Update in conjunction with updates to your ​scanning equipment.
  • Importing files from version 3x is not supported on 64bit platform
  • Contact Digitizer model 2060, 2070, 2080 & 2090
  • Contact Digitizer LPT model 2040 & 2050 (32bit only)
  • Installers Digitally signed
  • Ability to scan children sizes 
  • Updated selection list for Style, Covering & Density
  • Improved 2D / 3D editing
  • Orthotic Design panel available (Polypro enabled)

Amfit Configure Thickness : Download Updater​

  • Updates configuration for min thickness to 1.6

Tecno Logica Mexicana S.A.

Version 5.9.6.4 TLM : Download Installer​

  • ​Ability to scan children sizes
  • Spanish Language
  • Default transfer mode set to TLM setting
  • Mill diagnostics panel improvement
  • New licensed/non licensed networking option available
  • Handling of milling states and lower level networking routines improved
  • Digi model 2070, Mill model XL, Wide blank, European sizing, TSB, Tekscan, & HIPPA support  
  • Updated selection list for Style, Covering & Density
  • Improved 2D / 3D editing
    • Ability to move scanned data within the template
  • Orthotic Design panel available (Polypro enabled)
    • Ability to edit & produce Polypropylene shells

 ©Copyright 2022 All Rights Reserved Amfit Inc.

Amfitware Configure Tool - Adjustments : Download Updater​ 

  • ​Updates Amfit software adjustment limits for Pad and Heel Cupping tool

Amfit Configure IP - TLM : Download Updater​

  • ​Updates configuration for the Amfit application's Internet-enabled services

Amfitwin version 7.1.3 Updater : ( 32bit | 64bit​ )

  • ​Important note: if you use an Amfit Mill, run the 7.1.3 Update in conjunction with updates to your ​scanning equipment.
  • Contact Digitizer model 2060, 2070 & 2080 supported
  • Importing files from version 3x is not supported on 64bit platform

Amfitware Configure Tool : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Ability to open and edit records from the central database
  • Ability to send files to central database
  • ​Updates configuration to switch the transfer panel to Send to Fabrication Center
  • Installer Digitally signed

Amfit Configure IP - Mandoos - Main : Download Updater​

  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Mill & edit station

biomechanical solutions

Amfit Database Reports 4.1 : Download Installer​ 

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)

bioped

Amfitware Configure Tool - Surefoot : Download Updater​ 

  • ​Updates configuration for the Amfit application's Internet-enabled services

Amfit Database Reports 4.1 : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)

FOOT SOlUTIONS

Amfit Database Reports 4.1 : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)

Amfitware Amfit Database Reports 4.1 - Rainville : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed

ALTHEA's FOOTWEAR SOLUTIONS INC.

SUREFOOT

Version 7.1.5 for Win98: Download Updater​

Configure Satellite Site : Download Updater​ 

  • ​Configuration is intended for Satellite Site
  • Network is disabled
  • Ability to transfer records via FTP to BioMechanical Solutions server
  • Updates Sweep ID Prefix to GR

Amfit Upgrade version 5.9.6.4 TLM (Digitizer & Impress) : Download Updater​ 

  • ​Ability to scan children sizes
  • Added dongle failure support
  • Configuration is intended for Satellite Site
  • Network is enabled
  • Digitizer updater

Amfitware Configure Tool - Satellite : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Digitizers and satellite station
  • Ability to send files to central database
  • Installer Digitally signed

Version 7.5.1 : Download Installer ( 32bit | 64bit ) | Download Updater

  • Important note: if you use an Amfit Mill, run the 7.5.1 Update in conjunction with updates to your ​scanning equipment.
  • Importing files from version 3x is not supported on 64bit platform
  • Contact Digitizer model 2060, 2070, 2080 & 2090
  • Contact Digitizer LPT model 2040 & 2050 (32bit Only)
  • Ability to search by Phone Number added
  • Installers Digitally signed
  • Improved data saving when creating new records
  • Improved data saving when rescanning foot records
  • Installation of key cuts changed to 1 entry widget
  • Mill Diagnostics panel improvement

Amfitware Amfit Database Reports 4.1 - BioPed : Download Installer​

  • ​Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed

Amfitware Configure Tool - Corporate : Download Updater​​ 

  • ​For internal use

Amfit Database Reports 4.1 : Download Installer​

  • Enables end users to retrieve a listing of records by timestamp (manifests produced)
  • Installer Digitally signed
  • Ability to print labels issue fixed

Amfitware Configure Tool - Satellite : Download Updater​ | Download Updater​ #2

  • ​Updates Amfit software configuration to send records to FS Corp Fabrication​

Amfitware Configure Tool - Corporate : Download Updater​

  • ​Must have Amfitwin version 7 to run this updater
  • Updates configuration for the Amfit application's Internet-enabled services
  • Configuration is intended for Mill & edit station
  • Ability to send files to central database
  • Installer Digitally signed